Figure 5-26 Staple-mode feed and delivery diagram (4 of 6) Stapler/stacker operation depends on whether the device detects the final page in the staple job. â� No. The feed motor (M1101) changes speed and another page enters the stapler/stacker. The stapler/stacker-driver PCA activates the jogger motor and the jogger guide moves to align the media stack horizontally. The stapler/stacker-driver PCA activates the paddle motor and the paddle pushes the page up against a guide to align the media stack vertically. The delivery deflector moves into position to allow the next page to enter the stapler/stacker. Yes. The feed motor (M1101) turns off. The stapler/stacker-driver PCA activates the jogger motor and the jogger guides move inward to align the media stack horizontally. The stapler/ stacker-driver PCA activates the paddle motor and the paddle pushes the page up against a guide to align the media stack vertically. Then the pages are stapled.
â�
Figure 5-27 Staple-mode feed and delivery diagram (5 of 6) After the pages are stapled, the stapler/stacker-driver PCA activates the feed motor (M1103; counterclockwise) to again engage the upper and lower delivery rollers. The stapled stack is moved all of the way out onto the jogger guides. The stapler/stacker-driver PCA activates the jogger motor